Page 1 of 1

SD maximum size ???

PostPosted: 04 Jul 2016, 18:49
by SAN
Does anybody know the maximum size of the sd-card(reader) I have a 256GB and it does not read. A 16GB works but what is the maximum size ??

Re: SD maximum size ???

PostPosted: 05 Jul 2016, 12:58
by Joyce
Dear SAN,

The EM7480 is compatible with a SD-card up to 64GB

Re: SD maximum size ???

PostPosted: 15 Feb 2017, 03:29
by hofgeest
i bought 4 sandisk ultra 64 gb (sd xc 1 - 48 mb/s) and all are not being recognized by both of my em7480 media players.

my old card (sandisk ultra 32 gb - micro sd hc 1 - used with a adapter) works perfect.

what am i doing wrong ?

hofgeest.

Re: SD maximum size ???

PostPosted: 15 Feb 2017, 10:22
by Joyce
Dear hofgeest,

Please first make sure the SD card is formatted properly and is accessible by inserting the SD-card in a PC/laptop.

Re: SD maximum size ???

PostPosted: 15 Feb 2017, 10:44
by hofgeest
well, i put many movies and series on them. and i can read the folders from my pc.

Re: SD maximum size ???

PostPosted: 15 Feb 2017, 12:09
by Joyce
Dear hofgeest,

Just performed a new test on the EM7480 with a Sandisk 128GB SD XC 1 class 10 (FAT32) and I was able to view and play files from this SD card. My suggestion is to format your SD card again (FAT32) and try again because it should work.

Re: SD maximum size ???

PostPosted: 22 Feb 2017, 15:46
by hofgeest
hi joyce.

ok, i formatted the sd cards in fat32.
and it is indeed working now. thank you.

but now i get "Niet-ondersteunde GMC" error.
(not supported gmc)
and the screen gets very bad every 10 or 20 seconds.
my english is not so good, so it is difficult to describe for me.

i downloaded the latest firmware from your website,
and installed it with a usb stick.
the update went fine, but the error message remains.

do you know what to do about this ?

thank you
hofgeest.

Re: SD maximum size ???

PostPosted: 23 Feb 2017, 10:43
by Joyce
Beste hofgeest,

Je kunt ook in het Nederlands communiceren.

Deze melding heeft geen betrekking op de SD-kaart zelf maar op het bestand dat je probeert af te spelen GMC staat voor Global Motion Compensation en dit is een functie die in VXID MPEG bestanden kan voorkomen echter wordt deze optie zelden tot nooit gebruikt en wordt ook niet ondersteund door de Realtek chipset die in de EM7480 zit. Ons advies is om een ander film te proberen aangezien deze zeldzame versie van xvid niet wordt ondersteund door de speler.